High Pressure Car Washer Machine Contactless Automatic Car Washing Equipment

Product Description

Single Arm Touchless Automatic Car Washing Machine

 

360º Washer machine is our latest model touchless car washer with single arm. It makes 360º overall cleaning without dead angle. It is wipe-free, crystal coating and automatic drying. It is made of high quality parts, imported software and intelligent control panel.  
 

Product Description

Name	Contactless car washing machine
Model	Snow Leopard AL-S18
Technical Parameter	Equipment size	Overall dimension: length × width × height = 3.5m × 1.2m × 0.9m
		High-pressure pumping station: length × width × height = 1.2m × 1.0m × 0.8m
	Installation scope	Length 6700mm × Width 3550mm × Height 3100mm
	Power requirements	Voltage AC220V60Hz, capacitor 18KVA (maximum operating power 16kw)
	Water source requirements	Pipe diameter DN25 flow rate ≥ 80L/min
	Air source requirements	0.75-0.9 Mpa(7.5-9 kgf/cm²)
	Ground flatness	Error ≤ 10 mm
	Washable models	Light four-wheel vehicles, medium-sized passenger cars, 9-seater minivans and below
	Car washing size	5.4m long × 2.1m wide × 2.1m high
	Car washing time	3-7 minutes
Function configuration	Car wash shampoo spray system		A group
	Water wax spray system		A group
	Mobile blow drying system		One set (4 fans)
	Unattended system mode
	Voice prompt function		Have
	Device data intelligence		Management, inspection, operation
	Trouble-shooting		Have
	Bottom spray cleaning system		Have
	Automatic emptying		Have
	Car wash count		Have
	3D stereoscopic detection		Have
	Colorful waterfall		Have
The key components	Installation frame		Hot dip galvanizing + outdoor plastic powder
	Control system PLC		China Pankang
	Pumping station main motor		Customized motor for carwashing machine 15KW
	Electrical components		French
	Ultrasonic sensor		Pepperl Fuchs Germany
	High pressure plunger pump		GTM high pressure industrial piston pump
	Air-dried aluminum shell motor		Fang Li
	High-pressure hose		Independent design and customization
	Engineering drag chain		Independent design and customization
	Geared motor		Fang Li
	Rotate arm		304 stainless steel
	Drive System		Taiwan Delta variable frequency drive
Cost of use per car	water consumption		100-150 L /vehicle
	Power consumption		0.8-1.2 kwh/vehicle
	Shampoo		60 ml /vehicle
	Water-consuming wax		12 ml/vehicle

 

 

Detailed Photos

Advantages: 
1. High pressure water, Three color shampoos, Waxing.
2. One rotation arm provides 360° liquids spray on vehicle surface.
3. Chassis Sprinkling systems can wash the vehicles bottom and tires
4. Built-in Dryers equipped with four high efficiency motors and fans
5. Touch Screen operate panel with different washing procedures.
6. CPU+PLC control system can easy to operate and maintenance.
7. High pressure pumps with free of wipes liquids wash car precisely.
8. Intelligent LED Tip Screen and voice prompt during wash progress.
9. Intelligent three-dimensional perception the vehicle body.
10. Fault Self Checking and Warning systems.
11. With on-site installation,testing,training.
 

Product Pictures

 

Product Parameters

Facotry Tour: 

 Alin Machine .,LTD is a car wash equipment manufacturer with almost a decade of design and production experience.Our customers are primarily made up of car wash service providers and we supply them with equipment like our car wash tunnel systems, rollover car wash systems, touchless car wash systems, soft-touch carwash systems, and high pressure wash systems. Based on time tested technology from Japan and combined with the latest innovations in Europe and America, Risense offers complete and unique car washing systems.
This dedication to quality continues throughout the manufacturing process. We use a mature and stable numerical control processing technology to process all components, frames, motors, and the non-standard parts used in our car wash equipment.



Our Certificates: 

Risense has obtained ISO9001 Quality System Certification, CE Quality Certification and ISO 14001 Environment Certification.

Our Services :
1. Pre-sale service: Our professional engineer could help you draw design drawings and installation drawings, so that you can save a lot of complicated processes
2. Guarantee period: 3 years ( 100,000 times), in guarantee period, if our car wash machine have any question, we could provide the parts free of charge.
3. Parts service: We will provide enough spare parts when shipment, such as reduction motor, nozzels, bearing, seals, walking wheels, sensor and so on.
4. After-sale service: When the machine has any question when using, we could guide you exchange the parts by video, until get better. If necessary, we could send the professional after-sales team to your shop and repair it.
5. Customized service: Our car wash machine could be customized, such as main component, appearance, color, logo and so on.

Case presentation:



1. What's time cost for complete fine washing of Leibao 360 ?
Leibao 360 running one circle spend 28 seconds, complete fine wash with high pressure water spray, wax, foam and air drying totally cost about 5 mins.
2. How about the air drying performance ?
Uses design of air fluid mechanics principle to achieve long-distance high-pressure air cylinder, can reach 90% drying result, the stability with safety are much more better than the profiling air drying in brush wash machine.
3. What's the cost for washing one car ?
For example in our city Hangzhou, water with electricity cost for one car is about 1.5 RMB, chemicals cost about 1 RMB, total 2.5 RMB equals USD0.45
4. What's the difference between Leibao 350, Leibao 360 and Sowrd X1 ?
Leibao 350 is a idea machine for fast car washing, the standard 350 machine doesn't have polish shampoo, water wax and air dry functions which available for 360, only high pressure water with pre-soak chemicals, meanwhile, the machine size is bit smaller than 360, Leibao 360 can wash some big size car which 350 may can not wash it. Sword X1 have similar functions with Leibao 350, but with different structure with more competitive price to provide customer a lower operating cost.
5. What's power supply required for running Leisuwash ?
Leisuwash car wash machines require 3 phase industry power supply, in China the standard is 380V/50Hz, if customer require different voltage or frequency, we have to customize motors from Siemens company, and change accordingly fans, low-voltage electrical cables, control units, etc.


Company profiles: 

Company Profile

 

Shandong Alin Machinery Co.,Ltd
 

ALIN Group E Vehicle factories are located in Liaocheng city, Shandong province, China. Covering 500,000 Sq.m factory land and 60,000 Sq.m production workshop, we have metal hardware manufacturing line, automatic E vehicle frame production line, automatic injection molding production line, automatic pickling and phosphating line, automatic spray and baking paint line, packing carton factory and so on.

We have professional engineers team, advanced testing equipment and training department. Our technological teamhave 35 senior engineers and more than 200 skilled workers, so that we can offer professional design according to customer's requirement. Our technical is top level in China with a number of independent intellectual property rights and patents.

Our factory are certified by ISO9001 management system certification, and the products have passed CE certification.

Our main products:
1. Modern design Electric bicycle, electric tricycle, electric car.
2. Multi-function electric vehicles: electric sweeping car, garbage truck, electric dining van, electric mobile shop and so on.
3. Electric vehicle accessories.
4.Automatic Car washer

Welcome to our factory: 



Customer visits: