360 single arm touchless automatic car washing machine
360º Washer machine is our latest model touchless car washer with single arm. It makes 360º overall cleaning without dead angle. It is wipe-free, crystal coating and automatic drying. It is made of high quality parts, imported software and intelligent control panel.
| Name |
Contactless car washing machine |
| Model |
Snow Leopard AL-S18 |
| Technical Parameter |
Equipment size |
Overall dimension: length × width × height = 3.5m × 1.2m × 0.9m |
| |
High-pressure pumping station: length × width × height = 1.2m × 1.0m × 0.8m |
| Installation scope |
Length 6700mm × Width 3550mm × Height 3100mm |
| Power requirements |
Voltage AC220V60Hz, capacitor 18KVA (maximum operating power 16kw) |
| |
|
| Water source requirements |
Pipe diameter DN25 flow rate ≥ 80L/min |
| Air source requirements |
0.75-0.9 Mpa(7.5-9 kgf/cm²) |
| Ground flatness |
Error ≤ 10 mm |
| Washable models |
Light four-wheel vehicles, medium-sized passenger cars, 9-seater minivans
and below |
| Car washing size |
5.4m long × 2.1m wide × 2.1m high |
| Car washing time |
3-7 minutes |
| |
| Function configuration |
Car wash shampoo spray
system |
A group |
| Water wax spray system |
A group |
| Mobile blow drying system |
One set (4 fans) |
| Unattended system mode |
|
| Voice prompt function |
Have |
| Device data intelligence |
Management, inspection,
operation |
| Trouble-shooting |
Have |
| Bottom spray cleaning system |
Have |
| Automatic emptying |
Have |
| Car wash count |
Have |
| 3D stereoscopic detection |
Have |
| Colorful waterfall |
Have |
| The key components |
Installation frame |
Hot dip galvanizing + outdoor
plastic powder |
| Control system PLC |
China Pankang |
| Pumping station main motor |
Customized motor for carwashing
machine 15KW |
| Electrical components |
French |
| Ultrasonic sensor |
Pepperl Fuchs Germany |
| High pressure plunger pump |
GTM high pressure industrial
piston pump |
| Air-dried aluminum shell motor |
Fang Li |
| High-pressure hose |
Independent design and
customization |
| Engineering drag chain |
Independent design
and customization |
| Geared motor |
Fang Li |
| Rotate arm |
304 stainless steel |
| Drive System |
Taiwan Delta variable
frequency drive |
| Cost of use per car |
water consumption |
100-150 L /vehicle |
| Power consumption |
0.8-1.2 kwh/vehicle |
| Shampoo |
60 ml /vehicle |
| Water-consuming wax |
12 ml/vehicle |
Advantages:
1. High pressure water, Three color shampoos, Waxing.
2. One rotation arm provides 360° liquids spray on vehicle surface.
3. Chassis Sprinkling systems can wash the vehicles bottom and tires
4. Built-in Dryers equipped with four high efficiency motors and fans
5. Touch Screen operate panel with different washing procedures.
6. CPU+PLC control system can easy to operate and maintenance.
7. High pressure pumps with free of wipes liquids wash car precisely.
8. Intelligent LED Tip Screen and voice prompt during wash progress.
9. Intelligent three-dimensional perception the vehicle body.
10. Fault Self Checking and Warning systems.
11. With on-site installation,testing,training.
Facotry Tour:
Alin Machine .,LTD is a car wash equipment manufacturer with almost a decade of design and production experience.Our customers are primarily made up of car wash service providers and we supply them with equipment like our car wash tunnel systems, rollover car wash systems, touchless car wash systems, soft-touch carwash systems, and high pressure wash systems. Based on time tested technology from Japan and combined with the latest innovations in Europe and America, Risense offers complete and unique car washing systems.
This dedication to quality continues throughout the manufacturing process. We use a mature and stable numerical control processing technology to process all components, frames, motors, and the non-standard parts used in our car wash equipment.
Our Certificates:
Risense has obtained ISO9001 Quality System Certification, CE Quality Certification and ISO 14001 Environment Certification.
Our Services :
1. Pre-sale service: Our professional engineer could help you draw design drawings and installation drawings, so that you can save a lot of complicated processes
2. Guarantee period: 3 years ( 100,000 times), in guarantee period, if our car wash machine have any question, we could provide the parts free of charge.
3. Parts service: We will provide enough spare parts when shipment, such as reduction motor, nozzels, bearing, seals, walking wheels, sensor and so on.
4. After-sale service: When the machine has any question when using, we could guide you exchange the parts by video, until get better. If necessary, we could send the professional after-sales team to your shop and repair it.
5. Customized service: Our car wash machine could be customized, such as main component, appearance, color, logo and so on.
Case presentation:
1. What's time cost for complete fine washing of Leibao 360 ?
Leibao 360 running one circle spend 28 seconds, complete fine wash with high pressure water spray, wax, foam and air drying totally cost about 5 mins.
2. How about the air drying performance ?
Uses design of air fluid mechanics principle to achieve long-distance high-pressure air cylinder, can reach 90% drying result, the stability with safety are much more better than the profiling air drying in brush wash machine.
3. What's the cost for washing one car ?
For example in our city Hangzhou, water with electricity cost for one car is about 1.5 RMB, chemicals cost about 1 RMB, total 2.5 RMB equals USD0.45
4. What's the difference between Leibao 350, Leibao 360 and Sowrd X1 ?
Leibao 350 is a idea machine for fast car washing, the standard 350 machine doesn't have polish shampoo, water wax and air dry functions which available for 360, only high pressure water with pre-soak chemicals, meanwhile, the machine size is bit smaller than 360, Leibao 360 can wash some big size car which 350 may can not wash it. Sword X1 have similar functions with Leibao 350, but with different structure with more competitive price to provide customer a lower operating cost.
5. What's power supply required for running Leisuwash ?
Leisuwash car wash machines require 3 phase industry power supply, in China the standard is 380V/50Hz, if customer require different voltage or frequency, we have to customize motors from Siemens company, and change accordingly fans, low-voltage electrical cables, control units, etc.
Company profiles:
Shandong Alin Machinery Co.,Ltd
ALIN Group E Vehicle factories are located in Liaocheng city, Shandong province, China. Covering 500,000 Sq.m factory land and 60,000 Sq.m production workshop, we have metal hardware manufacturing line, automatic E vehicle frame production line, automatic injection molding production line, automatic pickling and phosphating line, automatic spray and baking paint line, packing carton factory and so on.
We have professional engineers team, advanced testing equipment and training department. Our technological teamhave 35 senior engineers and more than 200 skilled workers, so that we can offer professional design according to customer's requirement. Our technical is top level in China with a number of independent intellectual property rights and patents.
Our factory are certified by ISO9001 management system certification, and the products have passed CE certification.
Our main products:
1. Modern design Electric bicycle, electric tricycle, electric car.
2. Multi-function electric vehicles: electric sweeping car, garbage truck, electric dining van, electric mobile shop and so on.
3. Electric vehicle accessories.
4.Automatic Car washer
Welcome to our factory:
Customer visits:
){kind=link}
){kind=link}